The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

CastIron · 03-13-2019, 11:15 PM

One thing I did when I had my engine out was touch up the paint on the frame, crossmember, and flywheel cover with some Rustoleum. I also washed and waxed the firewall behind the engine, changed over the wiring to run an HEI distibutor (got rid of the resistor wire), and ran a new wire for the electric choke.

03-13-2019, 11:15 PM	#22
CastIron Registered User Join Date: May 2013 Location: Oregon Posts: 326	Re: While the 250 is pulled... One thing I did when I had my engine out was touch up the paint on the frame, crossmember, and flywheel cover with some Rustoleum. I also washed and waxed the firewall behind the engine, changed over the wiring to run an HEI distibutor (got rid of the resistor wire), and ran a new wire for the electric choke.