|
Re: #corona10truck - 77 C-10, pancaked crossmember - z'd frame etc etc etc
Quote:
Originally Posted by Low Elco
Back when I used to run really dropped trucks, We called it "beer can " clearance. If a Bud Light can laid on its side just touched the crossmember, that was about right. Of course, now we're discussing moving the crossmember up. So, you figure 4 ish with the standard parts, 5 1/2 with the crossmember, and a 2" z, you're at 7 1/2- 8, give or take. Just wondering where the line might be. Right now I'm a roller at stock height. This truck is getting completely stripped, just trying to figure how much I want to do while it's apart.
|
I'm just shooting for a 5 1/2"-6" front drop and an 8" rear drop for now. I'll see what it all looks like when it is put back together and adjust from there. I know I'm safe at the 6/8 range.
__________________
@badgaragebc
|