The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

matthufham · 02-19-2006, 09:25 PM

yea, if you have a angle grinder, put a flapper disk on it and tear it up. actually it won't tear it up much, but it should take it down to bare metal really fast unless you have a bunch of dents. just be sure to wear a dust mask and stay out of the wind.

02-19-2006, 09:25 PM	#4
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Cheapest way to remove old bondo. IDEAS? yea, if you have a angle grinder, put a flapper disk on it and tear it up. actually it won't tear it up much, but it should take it down to bare metal really fast unless you have a bunch of dents. just be sure to wear a dust mask and stay out of the wind.