[Crash_OK]

Update – I had a little time last week to work on the LX450.. I started out with getting the power steering system together. I used a Russell 648060 PS to AN fitting and -6an fittings and hose on the pressure side. This is very similar to what I did on the FJ62 LS swap and it has worked great.


I used the existing suction hose and cooler to connect the suction side of the 5.3 PS pump..






New water pump and idler pulleys..





Lower radiator hose…






Heater Hose




Finished up the wiring and most of the plumping under the hood… except for the plug wires..







Put the frontend back on…




I started on the shifter mods and looking at the exhaust.. hopefully I can get pack on this soon..