The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dsraven · 08-02-2019, 01:49 PM

how about pulling the column into the cab and try the angles with the shorter stub protruding into the engine bay. it may bring the cab end up so you can clear the headers. if it works then the shorter column may be easier than doing all the shafts and bearings and other spendy stuff. you may be able to shorten the column if required, ort sell it and get one thats a bit shorter.

08-02-2019, 01:49 PM	#299
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 7,837	Re: 57 Panel "FAKMLC" build how about pulling the column into the cab and try the angles with the shorter stub protruding into the engine bay. it may bring the cab end up so you can clear the headers. if it works then the shorter column may be easier than doing all the shafts and bearings and other spendy stuff. you may be able to shorten the column if required, ort sell it and get one thats a bit shorter.