The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

glock35ipsc · 07-13-2010, 07:03 PM

I was going to suggest fuelcellguy too.

You could also use a 25 gallon tank from an 87 TBI Suburban, and use an OEM in-tank pump sending unit. That tank and sending unit setup can be found fairly cheap on the board's classified section, or a junkyard.

Even new, those tanks are under $100, a new sending unit is less than $70, pump is about $68, and the filter/regulator is $35. Complete setup for under $300, brand new.

07-13-2010, 07:03 PM	#17
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: LS Engine fuel feed system I was going to suggest fuelcellguy too. You could also use a 25 gallon tank from an 87 TBI Suburban, and use an OEM in-tank pump sending unit. That tank and sending unit setup can be found fairly cheap on the board's classified section, or a junkyard. Even new, those tanks are under $100, a new sending unit is less than $70, pump is about $68, and the filter/regulator is $35. Complete setup for under $300, brand new. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 07-14-2010 at 10:19 AM.