Quote:
Originally Posted by my67chevytruck
I would hammer/dolly the area out unless the metal is so bad it needs to be replaced. as far as the jagged edge since the window moulding will be going there, i would wirewheel, and por-15 it or something similar. as far as the drip rail seams, I welded these up on my son's truck after cleaning very well, and treating with rust kill. good luck on your build you have a very nice foundation for sure.
|
Ya the cab is a great cab. not many issues at all.
I decided to have the cab media blasted this week and then will hammer dolly the dent as best as possible. It does not look to bad but they really caked on the bondo there for sure.
WHen you say you welded the seam up are you talking about on the front window? where the gap on each side of the window is. What is the gap there for originally?