View Single Post
Old 07-28-2018, 01:49 AM   #119
QBRacing
Registered User
 
Join Date: Apr 2016
Location: Auckland, NZ
Posts: 300
Re: 1958 SWB C4 Fleetside - NZ Build

Nutcase.
My chassis level is up the sheit atm as I have just fitted 18" BMW 5 series rims on the front to aid with clearing the C5 Calipers. Before you say it yes the BMW is 5x120 stud not 5x120.65 but you try finding 2nd hand C5 corvette rims in NZ and to keep it rolling thats fine by me. Before I hit the road I will have sourced more suitable rims.

With that said, normally with the 15" camaro rims all round the truck was sitting with about 2.5 degree rake but ATM its just under 1 as the front is sitting a bit higher now.

That said hope this image helps.

Please note that in the near future I will be moving the lower shock mount down about 25mm so that I can get more adjustability for the coil over. At present its on its lowest setting and other than a deck there isnt much weight to add.

Q
Attached Images
  
QBRacing is offline   Reply With Quote