|
Re: blazer project
I got the heater core and a\c evaporator installed. I changed the evaporator to one that would go in a late 90's van. It was real close to the same size as the original but is for 134a. I plan to buy a sanden type compressor and buy or make the hoses. I'm going to look at a salvage yard for a suitable 134a condensor. I also rearranged the wiring so that all the engine wiring comes out near the wires that go to the rear lights. I never liked the wiring in the channel across the firewall. On the inside i pulled the connectors out of the fuse block plug that i wanted to re-route and used an old fuse block plug as a connector.
|