Re: 1972 C10 ... SoCal BBC/TH400
I do have a few ECE parts on the truck.
However the current drop is from the previous owner., I was told they are Hotchkis springs but that is unconfirmed. The current setup uses a 3 or 4" drop spring in the front and causes a bump steer issue.
I am ordering some new ECE drop spindles and springs to redo the drop with their 3/5 package and will also rebuild the front end at the same time. There are a lot of cracked/dried boots and rod ends.
Then I will be researching rear gears and a posi/LSD!
|