The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**'68OrangeSunshine** · 06-21-2018, 04:47 AM

There should be a Fusable Link wire spliced into a 12- or 14 ga. wire coming from the Positive Terminal and going to the junction terminal on the Passenger side fender, where it connects to the front engine harness coming from over the radiator wall. The fusable Link there is supposed to melt and shut down power in the event of an overload or short.
If it's open, the truck should not start.

06-21-2018, 04:47 AM	#4
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,049	Re: C60 wiring harness in a K20? There should be a Fusable Link wire spliced into a 12- or 14 ga. wire coming from the Positive Terminal and going to the junction terminal on the Passenger side fender, where it connects to the front engine harness coming from over the radiator wall. The fusable Link there is supposed to melt and shut down power in the event of an overload or short. If it's open, the truck should not start. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.