|
Re: Window felt
Have you made sure that all the rollers in good shape lubed all the rollers and tracks then make sure to adjust track so that the window move smooth.
I assume you have power do you have dual relays trick on the window motors. First do you have the right yrs. rubbers and yrs. door trim rubber as a set matched yr. (80-79 glass thicker, 81-87 glass thinner) Or does any of the window rubber bulge more into the window side flaw or is there and old rubber or dirt build up anywhere. New seal will be snug. silicone, or something on the inner glass edge may help.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|