|
Re: 1989 Suburban 2WD 3/4 to 1/2 Swap?
Quote:
Originally Posted by lolife99
I would just swap everything from the a-arms out and leave the original crossmember in place.
Also use all the 1/2-ton steering.
|
The upper a-arm studs are likely larger on the 3/4 ton so the shafts might need to be drilled out to utilize the 1/2 ton arms as is.
The x-member is definitely interchangeable. I have a crossmember from a 1/2 ton under my 1-ton dually.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|