The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**'68OrangeSunshine** · 04-13-2019, 06:53 PM

If you want to go GM HEI [and not Pertronix] you might want to look into the separate Coil set up. Coil is mounted between the lifter covers, and distributor cap is a ''Low-Boy''. L6 distributor body is the same as the coil-in-cap, but a different coil-to-distributor harness is required.
I found it had less interference with the 292's taller head, so I got one for my L6, even if I don't have AC.

04-13-2019, 06:53 PM	#10
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,056	Re: Adding Vintage Air to inline 6 250 ? If you want to go GM HEI [and not Pertronix] you might want to look into the separate Coil set up. Coil is mounted between the lifter covers, and distributor cap is a ''Low-Boy''. L6 distributor body is the same as the coil-in-cap, but a different coil-to-distributor harness is required. I found it had less interference with the 292's taller head, so I got one for my L6, even if I don't have AC. Attached Images __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.