Quote:
Originally Posted by slammed57
wow, what cam and what mufflers are you running. sounds REAL good
|
The cam and all the valve train design was done by Straub Engineering in TN, He spec'd out everything for the engine build top end. The cam is a custom cut hyd roller he makes for S/C engines.
Lift is .6885 INT and .6630 EXH - 1.7 ratio
Duration @.050" is 260 INT and 275 EXH
Separation is 112
Its a big lift cam!
Muffs are just some Dynojet bullet mufflers from Summit. I need to add more MUFF...