Re: Turn Signal Problems
thanks for taking the time to discuss with me
Pic attached as I'm trying to understand the grounding of the Parking Lamp Housing
1. when pulling the wiring diagram I just noticed I have 3 wires from the wiring harness to the connector...not sure about that going to have to check on painless performance wiring kit.
2. the parking lamp housing has the two wires as on the diagram
3. Here's the symptoms.
- When lights off...blinkers and flashers work fine
- when Parking Lights or Headlamps on...no Blinky no flashy in front (rear is fine). This happens no matter what bulb I'm using...LED or normal
- When LED's installed...I get the added benefit of having the left turn signal in dash cluster in the on position
EDIT -
PS: I do notice that the passenger side bulb is dimmer than the driver side
__________________
JMC1965
1967 C20 LWB - 350 (ATK-HP32) / FiTech EFI
- 4L60e / 4 wheel disc brakes
- 20" American Racing VN327 & 245/50/20 Michelin
Last edited by JMC1965; 02-10-2018 at 01:03 PM.
Reason: more info...
|