12-10-2019, 03:28 PM
|
#14
|
Registered User
Join Date: Feb 2019
Location: Navarre, Florida
Posts: 199
|
Re: Pcking a high build primer
Quote:
Originally Posted by blackbart63mule
Plan for me is to go to bare metal, Tamco Epoxy Primer -Direct To Anything (chrome, stainless steel, aluminum, steel, etc. BUT not on top of old single stage-laquer,enamel,oil, alkyd, etc.), do the filler/bodywork, a HI-BUILD PRIMER’ block it out till smooth, and seal it with Epoxy. Like a sandwich. Iv’e used Ospho RustRemover witch is NOT compatable with this primer, so it’s gotta be soap & waterd off. I believe this primer has apretty heavy duty rust preventative in it. f course you will want to clean every area b-4 & after with solvent, but use caution, some solvents take the last layer off!
|
So, if going down to a mixed surface (some bare metal, some old paint on spots) what would you use if you don't use epoxy on the old single-stage?
|
|
|