Re: My 53 GMC 3/4 ton project
Quote:
Originally Posted by 8man
Nice solution and fab work.
|
Thanks
Quote:
Originally Posted by dsraven
good thinking on the ras support. should work good.
nice to see an AD that still has air under the frame rails. most lately seem to be sitting on the bottom of the cab. nothing wrong with that either, just nice to see a taller one too. should be a great driver. did you get the steering figured out to work with no problems?
|
I am with you on the height. It is cool to see the dropped ones but I'd rather to have some heights.
I have just started to work on the wiring. Hoping to finsh that, along with the steering soon.
Meanhwile I am finsihing up the cooling system. This is my solution for the cooling fan: a 2 speed junkyard taurus fan. the fan with its shroud is almost perfect fit turned at its longer length. I just had to trim the bottom of it to clear lower radiator hose. I made a little bracket at it bolted up to the original radiator nuts on rad support It clear the front accessories nicely.
__________________
1953 GMC 3/4 ton: current project
1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake
1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!!
1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive
1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project
2005 Silverado 2500, 4x4 Duramax, original owner
Last edited by Rickysnickers; 06-06-2022 at 10:25 AM.
|