The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JKeopf · 05-08-2022, 08:53 PM

I’m replacing the my points distributor with an HEI. I’ve got a ‘71 L6 250. Assuming there’s not a pre-bent line that works with the larger footprint of the HEI, what suggestions are there? I saw one picture of a rubber line that was routed from the pump up and over the valve cover. I’d rather go around the valve cover in a clean manner.

05-08-2022, 08:53 PM	#1
JKeopf Registered User Join Date: May 2022 Location: Mount Juliet, TN Posts: 1	Fuel line coordination with HEI I’m replacing the my points distributor with an HEI. I’ve got a ‘71 L6 250. Assuming there’s not a pre-bent line that works with the larger footprint of the HEI, what suggestions are there? I saw one picture of a rubber line that was routed from the pump up and over the valve cover. I’d rather go around the valve cover in a clean manner.