The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

First c10 · 12-10-2018, 05:35 PM

Hey Carter,
I installed this kit and plan on buying another to add more drops. I run 120+ psi. for about 2 years now and have not had a problem.

They have drain valves at each drop and I added a regulator, water trap, and dyer at the compressor. We used it to paint my truck and the air was clean and dry. I have a 6hp 80 gallon compressor

This is an amazon link but you can get it anywhere and sometimes cheaper too.

3/4" maxline garage air piping kit
Good luck Scott

12-10-2018, 05:35 PM	#147
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Finally...a new shop at the house Hey Carter, I installed this kit and plan on buying another to add more drops. I run 120+ psi. for about 2 years now and have not had a problem. They have drain valves at each drop and I added a regulator, water trap, and dyer at the compressor. We used it to paint my truck and the air was clean and dry. I have a 6hp 80 gallon compressor This is an amazon link but you can get it anywhere and sometimes cheaper too. 3/4" maxline garage air piping kit Good luck Scott __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!