The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - IL WTB 68 Panel/Suburban gas filler and marker light body cut

68PanelTruck · 11-29-2020, 11:58 AM

Hi guys,
I'm looking for a 68 panel truck/Suburban driver side rear quarter section that has the gas filler hole and marker light area. I prefer to have one rust free piece with both holes as they are close together. A piece that goes from the horizontal body line behind the rear wheel and up 10 inches above the gas filler hole (total of around 16") would be great. I don't need the taillight but it's ok if it is part of the cut. I'm near Chicago and can drive 400 miles or have it shipped (prefer).
This might help show what I need:

11-29-2020, 11:58 AM	#1
68PanelTruck Registered User Join Date: Aug 2020 Location: Frankfort, Ill Posts: 143	WTB 68 Panel/Suburban gas filler and marker light body cut Hi guys, I'm looking for a 68 panel truck/Suburban driver side rear quarter section that has the gas filler hole and marker light area. I prefer to have one rust free piece with both holes as they are close together. A piece that goes from the horizontal body line behind the rear wheel and up 10 inches above the gas filler hole (total of around 16") would be great. I don't need the taillight but it's ok if it is part of the cut. I'm near Chicago and can drive 400 miles or have it shipped (prefer). This might help show what I need: Attached Images __________________ It's not rust, it's called patina Trying to bring a 68 Panel Truck back from the dead. 396 Big Block, 4 on the floor, and a whole lot of rust.