axle installed, rolled out
rolled the cab back in to weld in the fender studs. originally the nuts were on the back side but they were stuck like glue, rusted after 75 years. I thought that it might be easier to line up if the studs poked out and you could hang the fender then add washers and nuts when you wanted.
started fixing my oops wrong hole.
welded up the tops of the motor mounts, still need the 7/16th 3" grade 8s
trans crossmember installed
more tomorrow, assembly should move quick, cab only comes off one more time after that. need to go to the scrapyard with the eyetalian superstar (the 95 longbed I just picked up) and dump the steel I have, the gas tank has a hole in it! gonna try a coarse thread bolt in the hole with some shmutz just to get by till I strip it for the next project.