Re: Speaker Wiring - Two Speaker - One Channel
Response from RetroSound:
"Out radio are not designed to run speakers wired paralleled . Each speaker output will run one four (4) ohm speaker only. Wiring the way you are suggesting would create a load the radio can not handle. "
2nd response:
"Our radio speaker wiring can not be run in parallel this will create a 2 ohm load the radio will see as a short and over heat and shut down. To run more than 4 speakers you would need and amp or run the speakers in series. The issue would be this would be an 8ohm load and would sound weak,"
Last edited by 61hawk; 07-20-2023 at 09:02 PM.
|