The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - front tire to firewall clearance square burb with Porterbuilt

G-NUT · 04-08-2020, 07:22 PM

Thanks for the detailed info. I've cut off the bottom of my frame rails that hung below the pinch weld. I welded into the frame some 2x4 tubing. I re-enforced the ends with steel plate where it joins back into the stock frame.

I ended up removing my stock AC components. Will go back with Vintage Air, probably be next Spring.

04-08-2020, 07:22 PM	#3
G-NUT Registered User Join Date: Apr 2014 Location: Baldwin County, Alabama Posts: 162	Re: front tire to firewall clearance square burb with Porterbuilt Thanks for the detailed info. I've cut off the bottom of my frame rails that hung below the pinch weld. I welded into the frame some 2x4 tubing. I re-enforced the ends with steel plate where it joins back into the stock frame. I ended up removing my stock AC components. Will go back with Vintage Air, probably be next Spring. __________________ '84 Suburban C10 Silverado - laying pinchweld to the ground on 22/24. /Porterbuilt / Accuair / Bonspeed / Landsail / Auburn Gear / Richmond Gear / Moser / Raybestos / ProMaxx / Edlebrock / Street Demon / Taylor Wire / K&N / MSD / KillMat / SOLD: 1985 GMC Sierra Classic 2500 3+3 Crew Cab Long Bed