Re: Rocker replacement 101
Ok so now you need to remove the old bolts but try not to damage the holes as they will help to re-build. Then take the front fender mount and transfer the holes to the new A-Pillar patch. Then bolt the new patch inplace and mark the two remaining holes and mark the top of the A-pillar patch onto the old A-pillar. This mark will help out later. Then remove the A-pillar, drill the last holes then set this piece aside for now.
Kevin
LFD Inc.
Last edited by Rokcrln; 12-23-2007 at 05:55 PM.
|