|
Re: Pitman are question
Quote:
Originally Posted by derotoreut
I ended up with two options. I bought a GR8 bolt at tractor supply. and I bought the one from LMC. It's actually a 9/16" fine thread. The one from LMC is also GR8. I ended up using the LMC one. The tractor supply bolt was a bit longer. They only had 3" or 3-1/2" long. The LMC one worked out good and had a good lock nut with it too.
|
After your post I think I used a 9/16" x 3 1/2" bolt in GR8. Not 1/2"
__________________
1956 Chevy Bel Air 2 door
1956 Chevy 210 4 Door
1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD
1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E
1968 K10 LWB Dark green my son calls it "THE HULK Jr" HULK JR *SOLD*
GO  GO!!!
|