The intercooler is in! I have modified the brackets to bring the intercooler closer to the radiator and to move the condenser down a couple of inches. After the modifications, the hood latch clears the condenser.
First, I had to make some cutouts in the core support. I was going to have to do this anyway to make a pass through for the tubing from the turbo and to the blower. Since I needed to move the intercooler back, the nozzles interfered with the core support.
I had to cut some of the structure of the core support out. I will reinforce it later.
Here are the completed brackets on the table:
Here is a front view of the intercooler installed:
Here is a rear view:
Here's a view of the intercooler, condenser and hood latch:
The elbows for my intercooler tubing are on back order, so I will be working on the brace for the hood latch and reinforcing the core support next.