The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mr.chevy · 12-01-2010, 11:53 AM

New Master Cylinder
So a while ago i stumbled on a 72 GMC 3/4 ton in a junk yard. It had a power master cylinder in it. I asked about the price for it and they let it go for 25 bucks if i remember correctly. I also stripped some more parts off of it but we will get to that later. So here are some pictures of the motor before and after master cylinder change out. The lines are now hooked up.
So here are the Pictures that show it. But it isn't going to work. Its shot.

12-01-2010, 11:53 AM	#2
mr.chevy Registered User Join Date: Jul 2010 Location: Spanish Fork, Utah Posts: 209	Re: 67 C20 LB Conversion to C10 SB Fleet. New Master Cylinder So a while ago i stumbled on a 72 GMC 3/4 ton in a junk yard. It had a power master cylinder in it. I asked about the price for it and they let it go for 25 bucks if i remember correctly. I also stripped some more parts off of it but we will get to that later. So here are some pictures of the motor before and after master cylinder change out. The lines are now hooked up. So here are the Pictures that show it. But it isn't going to work. Its shot. Attached Images __________________ Ben Its a 67 Chevy C10 now, and its short now too. Here is my 1967 Chevy C10 Shortened Build Blog http://boyescustoms.blogspot.com Here is my 1967 Chevy C10 Shortened Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=433535