View Single Post
Old 03-27-2024, 07:42 PM   #1
HWY-STAR
Senior Member
 
HWY-STAR's Avatar
 
Join Date: Jan 2021
Location: South east Mn.
Posts: 257
Spring Jefferson car show and swap meet. Aprill 26, 27

Hello everyone.
I will be at the spring Jefferson car show and swapp meet.
If anyone from the forum is going, stop buy for a meet and greet, a chair and a cold, beer, water or soda.
Or i may have something your looking for.
I plan on bringing all 67-72 truck parts that will fit in my load.
Naturally I can't bring it all so if anyone has a parts request please just ask. If I have the part your looking for, I will fit it in the load. If I bring a part for your inspection, you will not be committed to buy it just becouse i brought the part to the swap meet.

Spring Jefferson car show and swap meet. April 26, 27
My swap spot # is WC-118 & WD-117
MY CELL # IS. 507 458 1699. DAN

Here is a partial list I know I am bringing.
My prices are going to be low as I am getting out of the truck parts, buying and selling.
I plan on getting down to one truck and a few backup parts. Honestly I am getting to old
To keep doing swap meets, they are a lot of work. and and you need a good back.

NOS PARTS
67-68 bed molding. ..................pieces of factory paper
69-72 upper bed molding. ..........pieces of factory paper
Right side fender for 68 Chevy or 68-72 GMC.....in factory box
headliner still in factor box. I believe it's med blue......in factory box
GMC 69-72 tailgate...............in factory box
Set of rocker panels

USED PARTS
72 doors
68-71 doors
1-1967 driver side fender, no rust
68 Chevy fenders
69- 71 fenders, no rust
Radiator Core supports. GMC, 67-68 and 69-72
67-68 front grills, 5 of them
Front and rear bumpers
Bench seats with fold down back and non folding. I believe they are all full foam.
1 bench seat from a 65 Chevy truck.
3 Chevy tailgates in different stages of repair
I gmc tailgate, pretty rough but good for a bench seat or still usable
Tailgate hardware
67-68 steering wheels
69-78 steering wheels
Assorted emblems
Tail light and front marker/blinker housings for all years
Side marker housings


All the other, more common parts.
Glove box doors
Ashtrays
Door handles, arm rests.
Window and door crank
AM Radios
Dashes, I probably have 15 dash boards
1 tack dash
Lots of radio and instrument knobs
3 sets of 72 door panels
Seat belts
Hubcaps
In bed tool box from a longhorn, door needs repair
Center console, needs repairs but has the top trim
Door hinges hood hinges
Sun visors
Assorted headlight buckets
Headlight bezels
68 and up GMC grills, chrome hs some bad areas and a few dents
72 front grill, needs work. Has a few of the normal dents
69-70 front grill, driver quality, has a few dents
Short step side steps and brackets
1- step for step side long bed, with brackets
2 high humps, one low hump
1/2 ton front drum brakes with hardware and spindles if needed
Wiper motors
Wiper washer tanks and brackets
Radio delete plats, compleat.
Cowell with radio delete, no antenna hole
OEM radiators, 2,3 and 4 core. Some for automatic and some for manual trany,
condition unknown.
An assortment of drive shafts
1/2 and 3/4 ton oem helper springs
5, 6 and 8 lug wheels, some are 3 nub and some are 4
OEM fuel tanks, unknown condition
Parts or compleat heater control assembly, with or without cables.

I know I have left out some parts. I will add to this list when I remember.

Thanks everyone.
__________________
72 sierra grande 402/400
72 longhorn 402/400
67 swb fleet side 350/350 buddy buckets tack/vac dash project
71 Cheyenne c20 350/350 all original except seat cover-SOLD
1970 GMC 3500 SRW 350 4 speed-FOR SALE
72 c-30 bb 4 speed dump bed
72 k-20 4x4 350/350 patina rat rod---sold
80 chevy p20 aluminum step van 350/400 12 ft cargo
62 parts car & 63 project nova, 4 door 6 cy
74 Honda cb 360 only 4000 miles

Last edited by HWY-STAR; 03-28-2024 at 10:50 AM.
HWY-STAR is offline   Reply With Quote