[msg]

Just now having time to get to this. I went looking for the assembly manual reference to the adjustments but didnt see any there. I did see this one in the shop manual and it looks like my setup. It does show this to be a manual steering vs power and the conversion I have was done to power steering years ago. Is this adjustment still accurate for what I have? If I have the right reference that is.

The large spacing above the lower bearing you mentioned Lugnutz, I assume I should keep it where it is without adjusting? I replaced the clamp and screws on that lower bearing as the marks were still there from before I removed it. I just lined it up the same, thats not saying it was adjusted properly before or anything just as it was.