[reaper71]

Pic #1. This is the start of making that junk collector go away...1st I used Eastwood encapsulator inside the trough.

Pic #2. The start of getting the strips tacked in place (using 16g because i had it )

Pic #3. Here I'm showing the angle I set it at to prevent water (if any) to roll off the ledge. It is set at 10 degrees.

Pic #4. Another look, with the transition tacked in place.
(As i worked my way to through bend the degree started to drop to 0 )

Pic #5. One more shot...