The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Crash_OK · 01-13-2012, 11:35 PM

Almost finished with the harness. I added a fuse block, and a couple of termination strips. I still need to install 4 relays. Fuel Pump, Fan 1, Fan 2, and I will be adding a relay for the Hot in Run & Start source voltage. I have not decided if I will be using a relay or a switch for the TCC control…

Tomorrow I am going to start on the fuel system..

01-13-2012, 11:35 PM	#106
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Crash's 72 K10 Almost finished with the harness. I added a fuse block, and a couple of termination strips. I still need to install 4 relays. Fuel Pump, Fan 1, Fan 2, and I will be adding a relay for the Hot in Run & Start source voltage. I have not decided if I will be using a relay or a switch for the TCC control… Tomorrow I am going to start on the fuel system.. __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build