The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

fastbagged68 · 02-12-2014, 03:05 PM

You can get collars from McMastercar and drill and tap them. Mount them to your pb trailing arm. Then for the frame you can weld or make a c channel bracket to bolt the sensor to. If you do a c channel you can slide it around to figure out the travel.

I have also installed the collars on the front shocks or tap the control arm. Mount the sensor on the pb upper airbag mount. Backside of control arm.

02-12-2014, 03:05 PM	#2
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Re: Mounting Accuair Leveler sensors You can get collars from McMastercar and drill and tap them. Mount them to your pb trailing arm. Then for the frame you can weld or make a c channel bracket to bolt the sensor to. If you do a c channel you can slide it around to figure out the travel. I have also installed the collars on the front shocks or tap the control arm. Mount the sensor on the pb upper airbag mount. Backside of control arm.