[72BlckButy]

Now that three out of the four-step tin removal is complete, it is time to move onto the final tin, the rear tin.

Proceed by removing eight (8) screws using the 1/4" socket and the remove the rear tin.









Once removed you can remove the speedometer from the rear tin and we're almost ready to reassemble the cluster. Now that the speedometer is removed, you will need to swap the light tubes, lenses and seals over to the tach rear tin like pictured below. FYI - the lense and tube located behind the speedometer is shorter and contains a red lense for the high beam notifier.