The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

shifty · 09-20-2005, 07:47 PM

Okay, thanks again. Front clip is off. Lots more bolts were there than described, but I guess that's how it goes

Some thoughts:
- I should have done this from the start. It only took two average sized guys to lift it. I brought my neighbor over to balance the front end.
- It would be easier if there were no tires or steering column.
- I gotta swap out the steering box anyway.
- REMOVING THE WIPER ARMS IS A PAIN IN THE ASS.
- There were hardly any shims, I'll use this method more often.
- I found some more rust in the corner with the battery

Here are some pics for entertainment purposes.

09-20-2005, 07:47 PM	#32
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Okay, thanks again. Front clip is off. Lots more bolts were there than described, but I guess that's how it goes Some thoughts: - I should have done this from the start. It only took two average sized guys to lift it. I brought my neighbor over to balance the front end. - It would be easier if there were no tires or steering column. - I gotta swap out the steering box anyway. - REMOVING THE WIPER ARMS IS A PAIN IN THE ASS. - There were hardly any shims, I'll use this method more often. - I found some more rust in the corner with the battery Here are some pics for entertainment purposes. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 09-20-2005 at 07:48 PM.