The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 Installing door sound deadening material

sack54 · 03-29-2020, 05:33 PM

Well it will have to be cut into strips about 5 to ten inches wide. This is done for easy handling. Next put the pieces in the freezer for 10 mins. or so, this helps to place the pieces in the door without sticking, once in place start to push in place then roll done next strip time . I did both sides of my doors . No more tin sound,very solid. Get a good roller a short handle and a long handle to get where your arm does not reach or fit. Good luck !

03-29-2020, 05:33 PM	#2
sack54 Registered User Join Date: Dec 2017 Location: Londonderry NH. Posts: 138	Re: Installing door sound deadening material Well it will have to be cut into strips about 5 to ten inches wide. This is done for easy handling. Next put the pieces in the freezer for 10 mins. or so, this helps to place the pieces in the door without sticking, once in place start to push in place then roll done next strip time . I did both sides of my doors . No more tin sound,very solid. Get a good roller a short handle and a long handle to get where your arm does not reach or fit. Good luck !