The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**dennislbrooks** · 08-29-2020, 06:29 AM

I agree with Z.

You may get by with only the rear drive shaft needing shortened 2 inches. The front shaft may have enough slide left - dunno. It will probably be less expensive and less problems in the long run to moved things back.

I did like the extra engine clearance on adding a bbc by moving it forward - much fabrication.

08-29-2020, 06:29 AM	#3
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,764	Re: 700R4 in my K10 long bed I agree with Z. You may get by with only the rear drive shaft needing shortened 2 inches. The front shaft may have enough slide left - dunno. It will probably be less expensive and less problems in the long run to moved things back. I did like the extra engine clearance on adding a bbc by moving it forward - much fabrication. __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T Last edited by dennislbrooks; 08-29-2020 at 06:31 AM. Reason: words