The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Uncle Loyd's 72' C-10

cornerstone · 03-22-2020, 06:31 PM

After I realized it was going to be necessary to cut out my floor to make room for the bigger transmission now poking through, I bought a new aftermarket high hump cover. I laid it on the floorboard and marked the outer line and holes to drill, then trimmed the excess away. I bought one of these nutsert tools so I could bolt it down. This thing is very handy...

03-22-2020, 06:31 PM	#77
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: Uncle Loyd's 72' C-10 After I realized it was going to be necessary to cut out my floor to make room for the bigger transmission now poking through, I bought a new aftermarket high hump cover. I laid it on the floorboard and marked the outer line and holes to drill, then trimmed the excess away. I bought one of these nutsert tools so I could bolt it down. This thing is very handy... Attached Images __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.