The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

66C10LB · 01-27-2019, 11:27 PM

Impressed with your progress on the metalwork! Great idea with the enclosure for the sand blasting. Good solution on the outer rear of the cab (finding a new back for it). I have a similar issue. Was thinking I should buy a shop press, create a press brake, and make the bends in sections. The other solution I was thinking about was maybe a bead roller with a tipping die.

01-27-2019, 11:27 PM	#102
66C10LB Registered User Join Date: Jul 2016 Location: West Kelowna, BC, Canada Posts: 204	Re: 66 GMC Long to Short LS Swap Impressed with your progress on the metalwork! Great idea with the enclosure for the sand blasting. Good solution on the outer rear of the cab (finding a new back for it). I have a similar issue. Was thinking I should buy a shop press, create a press brake, and make the bends in sections. The other solution I was thinking about was maybe a bead roller with a tipping die.