The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 2 1/2" ram horn exhaust manifolds? Or something better?

13lazer · 05-29-2010, 04:52 PM

I am also using the 2-1/2" ram horns and I love them. I also wanted to be able to remove them easy so I could work on my heads if necessary. I cut my exhaust pipes on each side just behind my motor and I installed a ball and socket exhaust connector like the ones that were on fox body mustangs and hipo thunderbirds. I don't have the problem of trying to tighten the three bolts at the bottom of the manifold in such a tight space anymore.

05-29-2010, 04:52 PM	#15
13lazer 13lazers' blazers Join Date: Jul 2005 Location: San Pedro, CA Posts: 152	Re: 2 1/2" ram horn exhaust manifolds? Or something better? I am also using the 2-1/2" ram horns and I love them. I also wanted to be able to remove them easy so I could work on my heads if necessary. I cut my exhaust pipes on each side just behind my motor and I installed a ball and socket exhaust connector like the ones that were on fox body mustangs and hipo thunderbirds. I don't have the problem of trying to tighten the three bolts at the bottom of the manifold in such a tight space anymore. __________________ 1970 2wd blazer 1972 1ton blazer 4x4 in progress 1966 mustang coupe (modified) 1985 c20 suburban tow rig 1996 462 ranger with a 150 efi merc. a former B.A.S.S. tournament boat almost all exempt from california smog laws intentionally.