|
Re: Project: '72 Family Hauler
Quote:
Originally Posted by shearjs
It was not overly difficult. I downloaded and printed the pages out of the service manual and followed those for disassembly and reassembly. The only special tools I bought were a deep socket to remove the nyloc nut that holds the steering shaft into the tilt housing and a couple of machine screws to use with a socket as a puller for the tilt pins. I reused the original bearings, but obviously greased them generously. I replaced the pointer, indicator dial, nss, firewall grommet, dash grommet, lower bearing retainer and shift arm for a total of $125 or so. I’ll take a couple pictures tonight of the finished column.
|
👍🏾 Thanks for the info! I found the service manual and it does seem relatively straight forward. Looking forward to seeing how yours turned out!
__________________
69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together
|