The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

AJs72K5 · 09-17-2008, 11:12 PM

UPDATE 9/17/08: The tranny is bolted in! We mocked up the crossmember and it is moved back about 1.5". The tall style 700r4/208 or 700r4/241 adapter is definately the way to go. It's a direct bolt in with the 1st gen crossmember. We still need to do all the small stuff with the tranny...hook up the cable shifter, TV cable, torque converter lockout, and the tranny cooler. We also need to bolt in the 241.

Here's a pic of the installed 700r4 showing the adapter and crossmember.

Tomorrow night: bolt in the 241 and attempt to get some of the wiring and cable related stuff done on the 700r4.

09-17-2008, 11:12 PM	#59
AJs72K5 Registered User Join Date: Nov 2007 Location: South Tx Posts: 1,083	Re: AJs 72 Pavement Pounder build UPDATE 9/17/08: The tranny is bolted in! We mocked up the crossmember and it is moved back about 1.5". The tall style 700r4/208 or 700r4/241 adapter is definately the way to go. It's a direct bolt in with the 1st gen crossmember. We still need to do all the small stuff with the tranny...hook up the cable shifter, TV cable, torque converter lockout, and the tranny cooler. We also need to bolt in the 241. Here's a pic of the installed 700r4 showing the adapter and crossmember. Tomorrow night: bolt in the 241 and attempt to get some of the wiring and cable related stuff done on the 700r4. __________________ - AJ Gray Matter Build - 1972 K5 with some stuff Last edited by AJs72K5; 09-19-2008 at 12:28 AM.