[wraprail]

On the front I did the same 20 degree angle cut only backwards this time. I could have just made a straight cut and removed the inch (or whatever I gained on the first cut) but I thought doing the same angle was best.. First reason was that I am not sure exactly how much wheelbase I added. I know it's less than an inch (I hope) but do not know exactly. Second reason I did not make a straight cut here was I wanted to keep the 2 bumper bolt holes intact. That way everything would line up and bolt back on. If I cut straaight and removed an inch the bumper bolt holes would go away. I cut just past the steering box mounting holes and the same place on other side.