Quote:
Originally Posted by Mbeef61
Haha that’s awesome. I have heard nothing but issues about leaks with the eliminators. I haven’t decided on wheels either yet. Need to finish the qa1 and measure. What size you planning? 20s?
I was wondering about 4:10 gears. It has 3.73. I was thinking I could finish and drive it before I do the rear and if it needs more go 4:10
Using a bench seat? I think I might need the shifter relocater also
|
Im gonna be using the buddy buckets i got today. I have a 1967 specific seat that i now need to sell or find a new home for. its a true 67 bench seat. My QA1 rear stuff is supposed to ship on the 14th this month...Ive already got all the stuff removed off the frame and ready for it.... Then once the cuts etc are done, she will get the final coat of POR15. 4:10 gears is what we figured for the best overall RPM..
https://www.tremec.com/calculadora.php
1 2 3 4 5 6
GM T56 (`94 and up) 6-speed manual 2.66 1.78 1.30 1.00 0.74 0.5
Select Transmission :
Magnum-F 2.66 - .50
Engine RPM :
2500
Enter your desired RPM for racing or cruising here.
Axle Ratio :
4.10
Enter your rear axle ratio here.
Tire Height (in) :
30
Enter your tire height here. Use the Aspect Ratio calculator below if you do not know your tire height.
Ratio MPH
1st Gear
2.66
20.46
The estimated speed you will be traveling based on the parameters you established and the transmission you selected.
2nd Gear
1.78
30.57
3rd Gear
1.30
41.86
4th Gear
1.00
54.42
5th Gear
.74
73.54
6th Gear
.50
108.84