The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Another way to skin the cat; the High Torque 292 LS swap

**dayj1** · 04-24-2015, 09:35 PM

I ordered some LS/SBC valve cover adapters on eBay and some plain Jane orange sheet metal valve covers. I also had to throw the intake on there just to see how it looked.

I liked the look of the LS1 intake. But, it wasn't quite what I wanted and things really went off the rails.

Friends with water jets are cool. Especially when you need things like a square bore to 3-bolt TB adapter:

I ordered up a Holley intake and attached the adapter:

And a test fit of the TB. That's the #1 shop dog, Vance, in the background, BTW.

Here is is sitting on the engine:

04-24-2015, 09:35 PM	#5
dayj1 Senior Member Join Date: Jul 2009 Location: Athens, AL Posts: 499	Valve covers and Intake I ordered some LS/SBC valve cover adapters on eBay and some plain Jane orange sheet metal valve covers. I also had to throw the intake on there just to see how it looked. I liked the look of the LS1 intake. But, it wasn't quite what I wanted and things really went off the rails. Friends with water jets are cool. Especially when you need things like a square bore to 3-bolt TB adapter: I ordered up a Holley intake and attached the adapter: And a test fit of the TB. That's the #1 shop dog, Vance, in the background, BTW. Here is is sitting on the engine: