Re: 51 Chev on a S10 frame, named Dale
OK, it was time to finish up the rear. I wanted to add a roll pan and make 2 tail pipes.
First, I made a paper template of what I wanted, and a friend of mine bent the metal.
I then made 2 end pieces, welded them on, then, made a box and frenched in a place for the tag. I also notched the panel for the 2 tail pipes.
Once the roll pan was complete, I added a skim coat of filler to cover the bends from the metal brake and mixed up some paint (Tremclad/Rustoleum) and painted it.
|