[gokellurself]

Yeah so the "Hydraulic Push Rod" is what's going to activate the MC. The small bolt at the end of it even had a little lock nut on it, so it looked like it was there to provide adjustment. I pulled the bolt and it was just a standard 1/4-24 bolt, so I hit the hardware store and got a longer one. I couldn't find the exact same head so I just went with a Fabory phillips head.

What trips me out is that with my booster and MC coming together I figured it'd at least be pretty close, but it had about an 1 5/16" gap, just wayyy too big. With the new bolt I set it to about a 1/4" and it felt way better, but now I'm just doing some reading and found an article claiming .020" to be the right gap, so it sounds like I still have a ways to go. Hope that helps