View Single Post
Old 10-28-2020, 09:39 PM   #7
tbrown5079
Registered User
 
Join Date: Feb 2007
Location: Blairsville, PA
Posts: 301
Re: Smoke test for a vacuum leak

I took the right (passenger) cover off and the gasket was pushed out about 2 inches. The rear bolt was also bent. This is the side the donor vehicle was hit on so I figure that is what caused the problem. I straightened the bolt and will replace the gasket tomorrow. I would have never found the leak without the smoke machine. Not too hard of a fix if nothing else turns up.
__________________
tbrown's 56 Cameo Build
tbrown5079 is offline   Reply With Quote