The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Beelzeburb, The Story More Than a Decade in the Making

1985-GMC · 12-02-2015, 04:08 AM

He said it's an engine enamel made by Pioneer: http://67-72chevytrucks.com/vboard/s...&postcount=474

Sorry to hear about the surface rust popping up everywhere. Everyone always says how great por15 is but I don't believe in painting anything without putting down primer first. I've done it in the past and it's always come back to bite me in the ass, never again.

I've always had good luck with rustoluem rusty metal primer and gloss black on top of that, I add enamel hardener to it as well and that makes it even better. The only problems ive come across is having the black start peeling after several years because of me not properly scuffing the primer. So either spray the black while the primer is still wet or sand it once it's dry.

12-02-2015, 04:08 AM	#237
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Beelzeburb, The Story More Than a Decade in the Making He said it's an engine enamel made by Pioneer: http://67-72chevytrucks.com/vboard/s...&postcount=474 Sorry to hear about the surface rust popping up everywhere. Everyone always says how great por15 is but I don't believe in painting anything without putting down primer first. I've done it in the past and it's always come back to bite me in the ass, never again. I've always had good luck with rustoluem rusty metal primer and gloss black on top of that, I add enamel hardener to it as well and that makes it even better. The only problems ive come across is having the black start peeling after several years because of me not properly scuffing the primer. So either spray the black while the primer is still wet or sand it once it's dry. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)