KS Tilt-Not Mine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sjarrett71 · 02-14-2011, 11:51 PM

Here's the link.

http://kansascity.craigslist.org/pts/2208280548.html

mcbassin · 02-14-2011, 11:54 PM

Quote:

Originally Posted by sjarrett71

Here's the link.

Can anyone tell from the pics if this is a real deal truck tilt? It says there is something broken too what about that?

sjarrett71 · 02-14-2011, 11:56 PM

I can't tell for sure. Looks a little long to me. One of the shift lever retainer pin holes is broke.

70LonghornCST · 02-15-2011, 12:13 AM

I would pass it over...

VA72C10 · 02-15-2011, 12:27 AM

Quote:

Originally Posted by 70LonghornCST

I would pass it over...

Classic Bowties · 02-15-2011, 03:53 AM

Quote:

Originally Posted by mcbassin

Can anyone tell from the pics if this is a real deal truck tilt? It says there is something broken too what about that?

Looks like it could be a real truck column, but if wanting to use it as an auto column shift tilt, at minimum it would need a replacement tilt only shift bowl (pic below) and a new indicator lens and lens housing. If this was being used in a manual or floor shift auto truck the lower shift arm lever may have also been cut off, if that is the case it should just be modified into a floor shift tilt. Mel

sjarrett71 · 02-15-2011, 09:49 AM

Like I said, not mine. I just thought it was cheap enough to post up the link.

02-14-2011, 11:51 PM	#1
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Tilt-Not Mine Here's the link. http://kansascity.craigslist.org/pts/2208280548.html __________________ -Scott-

02-14-2011, 11:56 PM	#3
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Tilt-Not Mine I can't tell for sure. Looks a little long to me. One of the shift lever retainer pin holes is broke. __________________ -Scott- Last edited by sjarrett71; 02-14-2011 at 11:59 PM.

02-15-2011, 12:13 AM	#4
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Tilt-Not Mine I would pass it over... __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

02-15-2011, 09:49 AM	#7
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Tilt-Not Mine Like I said, not mine. I just thought it was cheap enough to post up the link. __________________ -Scott-



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.